Filter
Top Products
10
INTRODUCTION
WARNING! As the projector lamp becomes extremely hot, air blowing out from the ventilation
slots can be uncomfortably hot.
Using the Kensington Lock
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver
Security System. Refer to the information that came with the system for instructions on how to use it to
secure the projector.
Input 2
Component 2
Terminals for component YPbPr
/
YCbCr.
WARNING
•
Do not disassemble any components except the lamp chassis cover while replacing the lamp.
•
Do not touch ventilation slots, lamp and objects next to them until they have sufficiently cooled down.
•
Never insert any objects through ventilation holes.
•
Do not use this unit near water or in a rainy/moist environment.
•
Keep at least 0.3 foot (10 cm) of space between ventilation slots and nearest object or wall.
Made in Taiwan
WARNING
•
Do not disassemble any components exc
ept the lamp chassis
cover while r
eplacing the lamp.
•
Do not touch ventilation slots, lamp and objects next
to them until they have suff
iciently cooled down.
•
Never insert any o
bjects through ventilation holes.
•
Do not use this uni
t near water or in a rainy/moist environment.
•
Keep at least 0.3 foot (10 cm) of space between ventilation slots and nearest object or wall.
Made in
Tai wa n
S-VIDEOVIDEO
RS-232
Pr/Cr Pb/Cb Y
Pr/Cr Pb/Cb Y
PC
S
-V
ID
E
O
V
ID
E
O
Pr/Cr
RS-232
Pb/Cb
Y
Pr/Cr
Pb/Cb
Y
PC
DVI
DVI
Projector (Rear View)
Input 1
Component 1
Terminals for component and
YPbPr/YCbCr.
RS-232C terminal
Firmware upgrade.
Input 3
Video/S-Video
Terminal for connecting video
equipment with an S-video and
Composite Video.
AC socket
Input: 100~240VAC
3.5A,50/60Hz
Exhaust vent
Input 4
DVI/PC
Terminal for Digital Video
Interface, computer and RGB
signals.
Kensington Security
Standard connector
Air filter/cooling fan
Remote control sensor