Filter
Top Products
Appendix
61
Video Compatibility Chart
1. Component 1/2 support signal formats are Y/Pb/Pr, Y/Cb/Cr
2. VGA port support signal formats are RGsyncB, RGBHV or RGBCsysc
3. “U” means manual setting is needed
DTV
Troubleshooting
Resolution
H-Freq
(kHz)
V-Freq
(Hz)
Comp1
Support
Comp2
Support
S-Video
Support
Compos-
ite Support
VGA
Support
DVI
Support
SD Video NTSC 640x480i 15.73 59.94/60 3 3 3 3
PAL 768x576i 15.63 50 3 3 3 3
SECAM 768x576i 15.63 50 3 3 3 3
NTSC-4.43 U U U U
PAL-M U U U U
PAL-N U U U U
NTSC-J U U U U
PAL-60 U U U U
NTSC-50
ED TV 480P 720x480P 31.5 59.94/60 3 3 3 3
576P 720x576P 31.3 50 3 3 3 3
HD TV 1080i/50 1920x1080i 33.8 50 3 3 3 3
1080i/60 1920x1080i 28.1 59.94/60 3 3 3 3
720P/50 1280x720P 37.5 50 3 3 3 3
720P/60 1280x720P 45.0 59.94/60 3 3 3 3
HTPC 720P/48 1280x720P 48
720P/75 1280x720P 75
Signal Horizontal Frequency (kHz) Vertical Frequency (Hz) DVI Support
480I 15.8 60
480P 31.5 60 3
576I 15.6 50
576P 31.3 50 3
720P 45.0 60 3
720P 37.5 50 3
1080I 33.8 60 3
1080I 28.1 50 3
Problem Check
Projector does not start
Projector power cord is not plugged into the wall outlet.
Remote control batteries have run out.
No picture
The selected input mode is wrong.
Cables may be incorrectly connected to the rear panel of the projector.
Power to the external connected device is off.
The video signal format of the video equipment is not set correctly.