Filter
Top Products
46
Easy to Use Functions
Automatic Power Off Function
Source Select
When an input signal is not detected or you
don't press any input button on
Keypad or
remote for more than 15 minutes, the
projector will automatically turn off if set to
“ON”.
Auto Power Off function will be disabled when
it is set to “OFF”.
Select “Auto Power Off” from the
“Options” menu on the menu screen.
For operating the menu screen, see
page 31.
Note
• When the Auto Power Off function is set to
“ON”, 5 minutes before the power turns off,
the message “Power OFF in
5 min.” will
appear on the screen to indicate the
remaining minutes.
Used to select the input source automatically
when there is no signal in the current input.
Select “source select” from the
“Options” menu on the menu
screen. For operating the menu
screen, see page 31.
Main Menu
Source Select
Auto
Manual
Main Menu