Filter
Top Products
40
Easy to Use Functions
Selecting the Picture Display Mode
This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose “Standard”, “Letter
Box”,
“Anam
orphic” or “Pixel to Pixel” image.
Switching the Picture Display Using
Different input signals
Press on remote or on
keypad and select layout.
• Each time is pressed, the display
changes as shown on page 41 and 42.
Info
• In the Pixel to Pixel Mode, images are
displayed in the original resolution, and will
not be
scaled.
Aspect Ratio Function
The layout menu enables you to control how
the projector resizes the input image
.
The following option are available:
COMPONENT 1
COMPONENT 2
VIDEO/S-VIDEO
DVI/PC
Aspect Ratio
Main Menu
Anamorphic
• Resolution 1024x576
• 4:3 input is stretched to fit 16:9 display
• Stretches entire image.
Pixel to Pixel
• Maintains input signal resolution. May have
black borders around image.
Standard
• Resolution depends on the Input Signal
• 4:3 input scaled to fit display height
• Width scaled to maintain 4:3 aspect ratio
• Black bars on left and right (taking up 25% of
the whole display)
LetterBox
• Resolution 1024x576
• 4:3 input scaled to fit display width
• Height scaled to maintain 4:3 aspect ratio:
1024x768
• 25% of the entire image on the top and bottom
is cropped.