Filter
Top Products
24
CONNECTIONS AND SETUP
Projection from behind the screen
Projecting a Reversed/Inverted Image
Place a translucent screen between the projector and the
audience.
Reverse the image by setting “Rear” for “PRJ Mode” in the
“Options” menu.
Projection using a mirror
Place a mirror (normal flat type) in front of the lens.
Reverse the image by setting “Rear” for “PRJ Mode” in the
“Options” menu, when the mirror is placed on the side
where the audience is.
Ceiling-mount setup
It is recommended that you use the optional ceiling-
mount bracket for this installation.
Before mounting the projector, contact your nearest
Authorized Service Center or Dealer to obtain the
recommended ceiling-mount bracket (sold separately).
Be sure to adjust the position of the projector to match
the distance (Z) from the lens center position to the
lower edge of the image, when mounting the projector
on the ceiling.
Invert the image by setting “Ceiling + Front” for “PRJ
Mode” in the “Options” menu.
Info
• When using a mirror, be sure to carefully position
both the projector and the mirror so that the light
does not shine into the eyes of the audience.
When using the default setting.
TOn-screen Display
The image is reversed.
When using the default setting.
TOn-screen Display
The image is reversed.
When using the default setting.
TOn-screen Display
The image is reversed.