Filter
Top Products
Using the answering machine
38
4 Press the red button on the handset to stop
recording.
5 Press Stop at the base station to return to
standby. The
PLAY light will flash and the
display will show that a new message has
been recorded.
Operating the answering
machine from the handset
You are able to fully control your On-Air
DECTf@x Plus answering machine through
your handset by pressing the keypad numbers.
• Press INT, then 7 then the green button on
the handset to access the answering
machine.
Intercom
While listening to your messages
Press To
Pause or restart listening
Skip to the next message
Restart listening to a message
Skip to the previous message
After listening to your messages
Press To
Replay all messages
Delete all messages
Record a new outgoing message
Stop recording the outgoing message
Listen to your outgoing message
Switch on the answering machine
Switch off the answering machine
• To finish operating the answering machine,
press the
red button.
To remotely access your answering machine see
‘Remote access’, on page 60.
If you have any mailboxes set up, the base station
will ask you for a mailbox number. If you want to
record the memo in a mailbox, enter the relevant
number (1 - 5). If you want to record in the main
memory, press 0.
Note: if you have created any mailboxes, you will
be asked to enter a mailbox number before
recording. Enter the number of the mailbox you
want the message stored in. The general memory is
mailbox 0.