Filter
Top Products
Setting up
Follow these steps to get your BT On-Air DECTf@x
Plus ready to use
8
1 Connecting the radio module
The radio module acts as a transmitter and
receiver for radio signals to and from the
handset(s). It goes at the back of the machine
on the right-hand side as you face it.
1 Place the spring loaded clip at the bottom of
the module into the slot that runs along the
back of the machine.
2 Clip the top part into place by pulling the
module up and towards the machine.
3 Connect the cable to the socket on the side
of the machine.
2 Connecting your On-Air
DECTf@x Plus to the telephone
line and mains power
1 Plug the telephone line cord into the socket
on the side of the machine, and connect the
other end into the telephone wall socket.
IMPORTANT
Before installing the radio module, make sure the
machine is not plugged into the mains.
1
2
3
1
2
3
4