Filter
Top Products
Using additional handsets
59
3 Press the green button.
4 At the other handset - press the green button
to connect the internal call. The two
handsets can now talk to each other while
the external caller is on hold.
5 At the first handset - press the red button to
end the internal call. Your external caller is
then transferred to the other handset.
Paging a handset
If you want to hail a handset or find out where
it is is, you can page it from the base station.
To page a handset fom the base station
1 At the base station, press OK/Menu then
Recall. The base station display will show
HANDSET NUMBER.
2 On the keypad, enter the handset number
(
1-4) that you want to contact. If you want to
contact all the handsets at the same time,
press the ✱ button. The display will show
FIND HANDSET.
or
A
B
C
2
eg
3 The base station will beep, and the
handset(s) you are contacting will ring.
4 At the handset being contacted, the display
will show a flashing
INTERCOM icon and the
handset will ring.
Call Monitor
When using a handset, it is possible to listen to
the conversation at the base station as well.
To listen to a call through the base station
1 At the handset- during a call press OK then 0.
The call can now be heard through the base
station loudspeaker.
2 To stop listening through the base station,
press
OK then 0 again.