Filter
Top Products
PaperJet 300 user guide ~ Edition 3.2 ~ 25th july ’01 ~ 3693
32
To copy a highly detailed original
A highly detailed document may be too much
for the memory. By switching the ADF
COPY setting on, you can set your PaperJet
300 to scan and copy at the same time.
This shows you how to switch ADF on
and off.
Press Function until the display shows
5: FAX SET UP?
Press Enter.
Press Function until the display shows
3: SETTINGS
.
Press Enter. Display shows
(01) PAUSE TIME
Press Function until display shows
COPY
MODE
(or enter 2, 2 to go straight there).
Press Enter. Display shows
MEMORY COPY
.
Press Function to switch between the two
options of
ADF COPY
and
MEMORY COPY
.
Press Enter to confirm.
Press Stop to return to standby.
NOTE
If there is not enough memory to scan all the
original document, copy it in stages.
Copies are reduced to 97% of the original to prevent
an original being copied onto two separate sheets.
Avoid using very smooth or slippery originals such
as fax roll paper or transparencies as these could
slip and the copy may run onto two pages.
On some types of paper the ink may take longer to
dry. Be careful to ensure it does not leave marks on
the original document.
Stop
KEYPAD
Caller Display lets you know who’s calling before you
answer the telephone. Providing you have free space
in the Directory, your PaperJet 300 will also show
you a list of new and old calls you have received.
The number of calls in the list is limited by the
number of free spaces in the 50 number Directory.
With a Caller Display service, your PaperJet 300
receives caller information which is transmitted over
the telephone network.
To use this feature you will first have to subscribe to
your network’s Caller Display service. Ask your
network provider for more information.
With Caller Display, your PaperJet 300 stores the
caller’s number if available, call date and time.
If you have stored the incoming number in the
directory or one touch memory, the display will
show the stored name.
Caller Display