Filter
Top Products
43
PaperJet 300 user guide ~ Edition 3.2 ~ 25th july ’01 ~ 3693
Feature Name Setting Options Explanation Original setting
Number codes
22 COPY MODE 00 ADF COPY Sets whether or not the document is MEMORY COPY
01 MEMORY COPY scanned into memory before copying.
Use ADF for documents too large for
the memory.
23 PAPER SIZE 00 A4 Allows you to set the size of paper A4
01 LETTER you want to print on.
02 LEGAL
24 ECM 00 OFF Allows you to switch error correction ON
01 ON mode on and off. Error correction
mode automatically rectifies errors
caused by bad lines, etc.
27 RESOLUTION 00 STANDARD Sets the default scanning resolution STANDARD
01 FINE setting.
02 SUPER
03 PHOTO
28 CONTRAST 00 NORMAL Sets the default scanning contrast NORMAL
01 LIGHT setting.
31 SEND REPORT 00 OFF Controls printing of automatic fax ON: ERROR
01 ON: EACH SEND transmission reports. Allows you to
02 ON: ERROR switch send report printing on and
off. Will print for each fax sent or
only when an error occurs.
32 TIMED REPORT 00 OFF Allows you to switch delayed send ON:ERROR
(Delayed send 01 ON:EACH SEND report printing on and off. Will print
report) 02 ON:ERROR for each delayed fax sent or only
when an error occurs.
35 B/CST REPORT 00 OFF When set to On a report is printed OFF
01 ON on completion of each broadcast fax.
36 PHOTO QUAL 00 STANDARD This sets the way the unit prints HIGH
01 HIGH halftones (greys).
47 INK SET 00 SETTING A Controls the amount of ink applied SETTING A
01 SETTING B to the paper when printing faxes and
copies. Setting A applies more ink
than setting B. Reduces print
definition but may be useful to
overcome problems with ink
smudging.