Filter
Top Products
PaperJet 300 user guide ~ Edition 3.2 ~ 25th july ’01 ~ 3693
34
Connecting to a PC
Loading the software
The procedures described here are written
for Windows 9x and Windows Me. If you
are running Windows 3.1x, there may be
some differences.
Switch off your PC and PaperJet 300.
Connect the printer cable provided between
your PaperJet 300 printer socket and the PC
parallel printer port (LPT1)
Switch on your PC and PaperJet 300
As your PC starts up, if it detects the
PaperJet 300 (it will show as Colour MFP
on your PC) and opens the Add New
Hardware Wizard screen, you should click
on Cancel to close the wizard.
Insert the PC Fax Software CD into the CD
drive. The CD should auto run and present
Your PaperJet 300 is supplied with software to
enable you to manage faxes from your PC, to scan
documents into your PC and to use it as a mono and
colour printer. It also contains a detailed user guide
for the faxing and scanning applications.
You are provided with a cable to enable you to
connect your PaperJet 300 to the PC parallel printer
port.
System requirements
Windows 95, 98, Me
16MB RAM, 486 processor or higher, 20Mb free
space on the hard drive.
Windows 3.1
8MB RAM, 486 processor or higher, 20Mb free
space on the hard drive.
Windows for Workgroups 3.11
10MB RAM (10Mb required by some applications),
486 processor or higher, 20Mb free space on the
hard drive.