Filter
Top Products
42
PaperJet 300 user guide ~ Edition 3.2 ~ 25th july ’01 ~ 3693
Feature Name Setting Options Explanation Original setting
Number codes
01 PAUSE TIME 03 3 seconds Sets the length of a pause inserted 3 seconds
-- --- seconds into a stored number.
12 12 seconds
05 TIMER REDIAL 00 OFF The number of times the machine 3 times
01 once will redial the number if the fax fails
02 2 times (e.g. other machine is busy). This
03 3 times setting applies to timed jobs only.
06 AUTO REDIAL. 00 OFF The number of times the machine 2 times
01 once will redial the number if the fax fails
02 2 times (e.g. other machine is busy). This
03 3 times
setting applies to non-timed jobs only.
07 No. OF RINGS 01 once Number of rings before your 7 times
02 2 times machine answers a call when set to
03 3 times RECEIVE MODE.
and up to and up to
11 11 times
09 F/T SW. OVER 00 OFF In AUTO mode, you can set the 5 times
01 3 times number of times the unit will ring if
02 5 times the incoming call is a voice call.
03 7 times At the end of these rings the unit
04 9 times prepares to receive a fax.
05 11 times
13 POWER SAVE 00 OFF If power save is set on the unit will Off
01 ON revert to an energy saving mode after
5 minutes of no use. This mode is
not recommended if you have a PC
connected.
17 KEY TONES 00 OFF Lets you set the pitch of the beeps Low
01 LOW you hear when you press a button.
02 HIGH
20 FAX HEADER 00 OFF This switches the fax header, that is ON (inside)
01 ON (outside) sent with each document, on and off
02 ON (inside) and determines whether it is printed
inside or outside the image area.
21 FAX FOOTER 00 OFF Sets whether the caller’s details OFF
01 ON are printed at the foot of received
documents.