Brocade Communications Systems 6650 Switch User Manual


 
226 Brocade ICX 6650 Security Configuration Guide
53-1002601-01
Displaying information about MAC-based VLANs
Displaying MAC addresses in a MAC-based VLAN
Enter the show mac-address command to display a list of MAC addresses in a MAC-based VLAN.
NOTE
In this output, (MBV) indicates MAC-based VLAN is enabled.
The following table describes the output from this command.
Type Dyn Indicates a dynamic host. Sta indicates a static host.
Pri This field indicates the value set for Foundry-MAC-based VLAN-QoS attribute in the RADIUS
configuration for dynamic hosts, if configured. If the Foundry-MAC-based VLAN-QoS attribute is
not configured, the value will be zero. For static hosts, the user-configured priority value for the
MAC address is displayed.
TABLE 53 Output field description of the show mac-address command
Field Description
Total active entries The total number of active entries for all ports.
MAC Address The MAC addresses assigned to this VLAN.
Port The interface for which this information is displayed.
Type Dynamic (MBV) Indicates a dynamic host. Static (MBV) indicates a static host.
Index The index of the entry in the hardware MAC table.
VLAN The VLAN to which these addresses are assigned.
TABLE 52 Output field descripion of the show table-mac-vlan ethernet command (Continued)
Field Description
Brocade# show mac-address
Total active entries from all ports = 1541
MAC-Address Port Type Index VLAN
0000.0020.0001 1/1/3 Dynamic(MBV) 1048 1
0000.0020.0002 1/1/3 Dynamic(MBV) 1832 1
0000.0020.0003 1/1/3 Dynamic(MBV) 9772 1
0000.0020.0004 1/1/3 Static(MBV) 328 1
0000.0020.0005 1/1/3 Dynamic(MBV) 8268 1
0000.0020.0006 1/1/3 Dynamic(MBV) 9084 1
0000.0020.0007 1/1/3 Dynamic(MBV) 632 1
0000.0020.0008 1/1/3 Dynamic(MBV) 3464 1
0000.0020.0009 1/1/3 Dynamic(MBV) 11404 1
0000.0020.000a 1/1/3 Dynamic(MBV) 12220 1
0000.0020.000b 1/1/3 Dynamic(MBV) 3768 1