Filter
Top Products
224 Brocade ICX 6650 Administration Guide
53-1002600-01
Clearing cached LLDP neighbor information
8
You can list all of the ports individually, use the keyword to to specify ranges of ports, or a
combination of both. To apply the configuration to all ports on the device, use the keyword all
instead of listing the ports individually.
Clearing cached LLDP neighbor information
The Brocade device clears cached LLDP neighbor information after a port becomes disabled and
the LLDP neighbor information ages out. However, if a port is disabled then re-enabled before the
neighbor information ages out, the device will clear the cached LLDP neighbor information when
the port is re-enabled.
If desired, you can manually clear the cache. For example, to clear the cached LLDP neighbor
information for port e 1/1/1, enter the following command at the Global CONFIG level of the CLI.
Brocade#clear lldp neighbors ports e 1/1/1
Syntax: clear lldp neighbors [ports ethernet <stack-unit>/<slot>/<port>| all]
If you do not specify any ports or use the keyword all, by default, the system will clear the cached
LLDP neighbor information for all ports.
Specify the ethernet port in the <stack-unit>/<slot>/<port> format. Stack-unit is 1.
You can list all of the ports individually, use the keyword to to specify ranges of ports, or a
combination of both. To apply the configuration to all ports on the device, use the keyword all
instead of listing the ports individually.