Filter
Top Products
87
General Information
3
Power Down mode 3
If the machine is in Deep Sleep mode for 4 hours, it will then go into Power Down mode automatically. Also,
the Ready LED will dim and turn on 2 seconds and off for 4 seconds. Power Down mode is the lowest power
consumption mode, which achieves a power consumption of less than 0.5 W. To start printing, press any key
on the control panel and then send the print data.
You can enable or disable the Power Down mode feature by following these steps:
a Make sure that the front cover is closed and the power cord is plugged in.
b Turn on the machine and wait until the machine is in the Ready mode.
c Press Go four times to change between On and Off.
All the LEDs blink twice when you turn on the Power Down mode.
All the LEDs blink once when you turn off the Power Down mode.
Note
The machine does not go into Power Down mode when the machine is connected to a wired network.