Brother 5470DW Printer User Manual


 
94
General Information
3
Ecology features 3
Toner Save 3
You can save toner using this feature. When you set Toner Save to On, prints appear lighter. The default
setting is Off.
a Press a or b to choose General Setup. Press OK.
b Press a or b to choose Ecology. Press OK.
c Press a or b to choose Toner Save. Press OK.
d Press a or b to choose On or Off. Press OK or Go.
Sleep Time 3
The Sleep mode setting can reduce power consumption. When the machine is in Sleep Mode (Power Save
mode) it acts as though it were turned off. The machine will wake up and start printing when it receives a print
job.
You can choose how long the machine must be idle before it goes into Sleep mode. When the machine
receives a print file or document, the timer will be reset. The default setting is 3 minutes. While the machine
is in Sleep mode the LCD will show Sleep.
a Press a or b to choose General Setup. Press OK.
b Press a or b to choose Ecology. Press OK.
c Press a or b to choose Sleep Time. Press OK.
d Press a or b to enter the length of time the machine will remain idle before entering Sleep mode. Press
OK or Go.
Deep Sleep mode 3
If the machine is in Sleep mode and does not receive any jobs for a certain length of time, the machine will
go into Deep Sleep mode automatically and the LCD will show Deep Sleep. Deep Sleep mode uses less
power than Sleep Mode. The machine will wake up, when the machine receives a print job.
If a wireless network is enabled, the machine will not enter Deep Sleep mode.
To disable the wireless network uu Network User's Guide: Control panel setup