Brother 5470DW Printer User Manual


 
37
Driver and Software
2
Sleep Time 2
When the machine does not receive data for a certain period of time, it enters sleep mode. In sleep mode,
the machine acts as though it were turned off. When you choose Printer Default, the timeout setting will be
reset to the specific time set at the factory; this can be altered in the driver. Intelligent Sleep Mode
automatically adjusts to the most suitable timeout setting depending on the frequency of your machine use.
While the machine is in Sleep Mode, the LCD shows Sleep, but the machine can still receive data. Receiving
a print job will automatically wake up the machine to start printing.
Macro 2
You can save a page of a document as a macro to the machine's memory. You can also execute the saved
macro (you can use the saved macro as an overlay on any document). This will save time and increase print
speed for often used information such as forms, company logos, letterhead formats or invoices.
Density Adjustment 2
Increase or decrease the print density.
Improve Print Output 2
This feature allows you to improve a print quality problem.
Reduce Paper Curl
If you choose this setting, the paper curl may be reduced.
If you are printing only a few pages, you do not need to choose this setting. We recommend that you
change the printer driver setting in Media Type to a thin setting.
Note
This operation will decrease the temperature of the machine's fusing process.
Improve Toner Fixing
If you choose this setting, the toner fixing capabilities may be improved. If this selection does not provide
enough improvement, change the printer driver setting in Media Type to a thick setting.
Note
This operation will increase the temperature of the machine's fusing process.
Reduce Ghosting
If you are using the machine in a high humidity environment this setting may reduce ghosting on the paper.
Do not use this setting if the ambient humidity is below 30% or ghosting may increase.
Note
This feature may not reduce ghosting for all types of paper. Before you buy a lot of paper, test a small
quantity to make sure that the paper is suitable.