Brother 575 Fax Machine User Manual


 
4 - 5
Initial Setup
VOLUME AMPLIFY: ON–TEMPORARY
This setting is appropriate if some of the users are
hearing-impaired. During a conversation, users can press
or on the control panel to adjust the volume to LOW or
HIGH. When the handset is replaced, the handset volume returns
to the default setting of LOW.
VOLUME AMPLIFY:ON–PERMANENT
Choose VOL AMPLIFY: ON?–PERMANENT? if all of the users are
hearing-impaired. During a conversation, users can press
or on the control panel to adjust the volume to LOW or
HIGH. When the handset is replaced, the handset volume returns
to the default setting of amplify.
Setting Volume Amplify
1
Press Menu/Set, 1, 4.
2
If none of the users are
hearing-impaired, press or to select
VOL AMPLIFY:OFF?, and then press Menu/Set and go to
Step 4.
OR
If some or all of the users are hearing-impaired, press or
to select VOL AMPLIFY:ON?, and then press Menu/Set.
3
If all the users are hearing-impaired, press or to select
PERMANENT?, and then press Menu/Set.
OR
If only some of the users are hearing-impaired, press or
to select TEMPORARY, and then press Menu/Set.
4
Press Stop/Exit.
When you press or on the control panel to adjust
the volume, the LCD shows the setting you are choosing.
Each key press changes the volume to the next setting.
It is important that you do not choose PERMANENT unless all
users are hearing-impaired. Otherwise, the default setting of
amplify may damage the hearing of some users.
Please carefully read Choosing the Handset Volume (For
Volume Amplify) on page 4-4 before you do the following
steps:
4.VOLUME AMPLIFY