Filter
Top Products
USING THE MULTI-FUNCTION LINK
®
SOFTWARE (FOR MFC 660MC ONLY)
15 - 5
3
Select the Print command to begin the fax transmission.
The Fax Sending dialog box will appear:
4
Enter the name and fax number of the recipient or select the Open Phone Book...
button and choose a name. Select Close to return to the Send Fax dialog box.
5
Select the Send cover page check box to include a cover page.
6
Select the Send Fax button.
Receiving Faxes into the PC
To receive faxes into your PC through the MFC, you must first connect your MFC to
your computer. Then, you can load the software.
Before You Begin
Use the following checklists for the MFC and PC, to make sure you have properly set
up the MFC and PC to work together.
Checklist for the MFC:
The default setting for MF Link mode is PC PRIMARY. In this setting all faxes will
be routed into the PC unless it is not turned on. If the PC is turned off, incoming faxes
will be printed on the MFC.