Filter
Top Products
11 - 2
PRINTING REPORTS
Transmission Verification (Xmit) Report
You can use the Xmit Report as proof that you sent a fax. This report lists the name
or fax number of the receiving party, the time and date of transmission, and whether
the transmission was successful.
When the feature is OFF, the report is printed automatically only if there’s an error
during transmission. If the report indicates NG, send the original again. If the report
indicates you should check the readability of certain pages, resend those pages.
When the feature is ON, the report is printed with every fax you send.
1
Press Function/Set, 7, 1.
2
Press or to select ON (or OFF) and press Function/Set.
3
Press Stop to exit.
Activity Report Interval
You can set the FAX/MFC to print activity reports at specific intervals (6, 12, 24
hours, 2, 4 or 7 days). If you set the interval to OFF, you can print the report by
following the steps in the previous section.
1
Press Function/Set, 7, 2.
2
Press or to display:
and press Function/Set.
3
Press or to choose your setting and
press Function/Set. If you choose 7 days, the screen prompts you to choose a day
at which to begin the 7-day countdown.
4
Enter the time, in 24-hour format, that printing will begin and press Function/Set.
(For example, enter 19:45 for 7:45 PM)
5
Press Stop to exit.
INTERVAL?