Brother 660MC Fax Machine User Manual


 
LOCATION AND CONNECTIONS
2 - 1
2
2
Location and Connections
Caution
1
Never install telephone wiring during a lightning storm.
2
We recommend that this product be used with a surge protection device to protect the
product against lightning storms.
3
Never install a telephone jack in a wet location unless the jack is specifically designed
for a wet location.
4
Never touch telephone wires or terminals that are not insulated unless the telephone
line has been disconnected at the network interface.
5
Use caution when installing or modifying telephone lines.
6
Avoid using a telephone (other than a cordless type) during an electrical storm. There
may be a remote risk of electric shock from lightning.
7
Do not use the telephone to report a gas leak in the vicinity of the leak.
8
For PLUGGABLE EQUIPMENT, the electrical outlet should be installed near the
equipment and should be easily accessible.
Choosing a Location
Place your FAX/MFC on a flat, stable surface, such as a desk. Select a place that is
free of vibration and shocks. Locate the FAX/MFC near a telephone jack and a
standard, grounded power outlet.
Avoid placing your machine in a high-traffic area. Do not place near heaters, air
conditioners, water, chemicals or refrigerators. Do not expose the FAX/MFC to direct
sunlight, excessive heat, moisture or dust. Do not connect your machine to electrical
outlets controlled by wall switches or automatic timers. Disruption of power can wipe
out information in the unit’s memory. Do not connect your machine to electrical
outlets on the same circuit as large appliances or other equipment that might disrupt
the power supply. Avoid interference sources, such as speakers or the base units of
cordless phones.