Filter
Top Products
9 - 7
MESSAGE CENTER
Programming a Fax Forwarding Number
1
Press Function/Set, 8, 6.
2
Press or until the LCD displays FAX FORWARD? and press
Function/Set.
3
Enter the number of the fax machine where
faxes will be forwarded (up to 20 digits) and
press Function/Set.
4
Press Stop to exit.
Programming Paging Number
1
Press Function/Set, 8, 6.
2
Press or until the LCD displays PAGING? and press Function/Set.
3
Enter your pager phone number (up to 20 digits)
followed by # # and press Function/Set. Do
not include the area code if it is the same as that
of your FAX/MFC. For example, 1 8 0 0 5 5 5 1 2 3 4 # #.
4
If your pager requires a PIN, enter the PIN, press #, press Redial/Pause, enter your
FAX/MFC telephone number, then press # # and press Function /Set. For example,
1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.
—OR—
If you do not need a PIN, press Redial/Pause, enter the telephone number of your
FAX/MFC, then press # # and press Function/Set. For example, Redial/Pause 1
8 0 0 5 2 1 2 8 4 6 # #.
5
Press Stop to exit.
You can change a Fax Forwarding number remotely. (See page 9-11.)
You can not use Paging and Fax Forwarding at the same time.
You can not change a Paging number or PIN remotely.
FWD#:
ENTER & SET
PAG#:
ENTER & SET