Filter
Top Products
27
Macintosh
®
Wired Network
Windows
®
Macintosh
®
Wired Network
c Carefully route the network cable through the
trench and out the back of the machine. Then,
connect the cable to your network.
d Gently close the scanner cover using the finger
holds on both sides of it.
WARNING
Be careful not to trap your fingers under the
scanner cover.
Always use the finger holds provided on both
sides of the scanner cover when opening and
closing it.
18
Install MFL-Pro Suite
a Put the supplied CD-ROM into your CD-ROM
drive.
b Double-click the Start Here OSX icon to install.
c Choose Wired Network Connection, and
then click Next. Follow the on-screen
instructions.
d The Brother software will search for the Brother
device. During this time the following screen
will appear.
Important
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both USB and LAN cables are being used,
guide both cables through the trench with one on
top of the other.
Note
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.