Brother 770 Fax Machine User Manual


 
19
INITIAL SETUP
NOTICE
The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or electronic device
to send any message via a telephone fax machine unless such
messages clearly contain, in a margin at the top or bottom of
each transmitted page, or on the first page of the transmission,
the date and time it is sent and an identification of the business
or other entity or other individual sending the message and the
telephone number of the sending machines or such business,
other entity or individual.
In order to program this information into your fax machine, you
should complete the steps described on page 16 and 17.
The telephone number you enter is used only for Call Back Message
and Cover Page features.
If you do not enter a fax number, no additional information can be
entered.
To enter a space, press once between numbers and twice between
characters.
If your Station ID has already been programmed, the screen prompts
“1” to make a change, or “2” to exit without changing.
Setting Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is LOW.
When the beeper is set to LOW or HIGH, the fax machine beeps every time
you press a key or make an error, and at the end of fax sending or receiving.
1
Press
Function
,
1
,
3
.
2
Press or to select your setting and press
Set
.
3
Press
Stop
to exit.