Filter
Top Products
Troubleshooting and routine maintenance
103
C
f Put the drum unit and toner cartridge
assembly into a plastic bag and seal the
bag.
g Close the front cover.
h Put the styrofoam piece marked
“FRONT” into the original carton (1).
Pack the drum unit and toner cartridge
assembly (2) and put it in as shown
below (3). Wrap the machine in the
plastic bag and put it in the original
carton (4). Put the printed material
behind the machine (5).
i Take the two styrofoam pieces and
match the front of the machine to the
“FRONT” mark on one of the styrofoam
pieces, and the back of the machine to
the “REAR” mark on the other styrofoam
piece (6). Put the AC power cord and
printed materials in the original carton
as shown below (7).
j Close the carton and tape it shut.