Filter
Top Products
CHAPTER 6 TROUBLESHOOTING
6–9
Q & A
This section contains questions and answers for using your printer. If you
have encountered a problem, find the question relating to your problem
and take the steps recommended to correct the problem.
Setting Up the Printer Hardware
Question Recommendation
The printer does not work. All
lamps are off.
The printer may be in sleep mode. Press the panel
switch
to wake up the printer. Check to see if the
printer is plugged into a live power source and the
power switch is on.
The printer does not print. Check the following:
The printer is turned on.
All of the protective parts have been removed.
The toner cartridge and drum unit are installed
properly.
The interface cable is securely connected between
the printer and computer.
Check to see if the
Alarm
lamp is blinking. If the
lamp is blinking, refer to the Operator Call section
of this manual.
Check to see if the
Ready
lamp is blinking. If the
lamp is blinking fast, the printer might be cooling
down to lower the printers internal temperature.
Open the top cover of the printer to lower the
temperature.