Filter
Top Products
SETUP SEND
6 - 6
Contrast
If your original is very light or very dark, you might want to set the contrast accordingly.
Use
S.LIGHT
to send a very light original. Use
S.DARK
to send a very dark original.
1
Place the original face down in the ADF.
2
Press Menu/Set, 3, 3.
3
Press to select AUTO, S.LIGHT or
S.DARK, and then press Menu/Set.
4
Press 2 if you are finished choosing settings, and go to Step 5—OR—Press 1 if you
want to select additional settings. The display returns to the Setup Send menu.
5
Enter a fax number, and then press Fax Start to send a fax—OR—Press Copy to
make a copy.
Resolution
When you have an original in the ADF, you can use the Resolution key. Press
Resolution continuously until you see your selection on the LCD.
Advanced Sending Operations
Overseas Mode
If you have difficulty sending a fax overseas, use the Overseas mode.
After you send a fax using this feature, the feature turns itself off.
1
Place the original face down in the ADF.
2
Press Menu/Set, 3, 5.
3
Press to select ON (or OFF), and then press
Menu/Set.
4
Press 1 if you want to select additional settings. The LCD returns to the Setup Send
menu—OR—Press 2 if you are finished choosing settings, and then go to Step 5.
5
Enter the fax number you’re calling.
6
Press Fax Start.
STANDARD Suitable for most typed originals.
FINE
Good for small print; transmits a little slower than standard resolution.
S. FINE
Good for small print or artwork; transmits slower than fine
resolution.
PHOTO Use when original has varying shades of gray; slowest
transmission time.
3.CONTRAST
or
5.OVERSEAS MODE
or