Filter
Top Products
5 - 1
INITIAL SETUP
5
MFC3200C-US-FM6.0
5
Initial Setup
Getting Started
Setting Paper Type
You can choose the paper type you want to use.
1
Press
Menu/Set
,
1
,
1
.
2
Press
to select
PLAIN
,
INK JET
,
GLOSSY
or
TRNSPRNCY
(TRANSPARENCY), and then press
Menu/Set
.
3
If you selected
GLOSSY
, press to select
GLOSSY:4-COLOR
or
GLOSSY:3-COLOR
, and then press
Menu/Set
.
4
Press
Stop/Exit
.
Setting Paper Size
You can use three sizes of paper for printing your faxes and copies — letter,
legal and A4. When you change the kind of paper you have loaded in the MFC,
you will need to change the setting for Paper Size so your MFC can fit the
incoming fax on the page.
1
Press
Menu/Set
,
1
,
2
.
2
Press
to select
LETTER
,
LEGAL
or
A4
, and then press
Menu/Set
.
3
Press
Stop/Exit
.
Note
The print quality of black ink varies depending on the kind of glossy paper you
are using. Black ink is used when you select
GLOSSY:4-COLOR. If the
glossy paper you are using repels the black ink, select GLOSSY:3-COLOR,
which simulates black ink by combining the three ink colors.
Note
The MFC ejects paper with printed surfaces face up onto the output paper
support in the front of the MFC. When you use transparencies, remove each
sheet immediately from the output paper support to prevent a paper jam or
curled pages.
1.PAPER TYPE
or
or
2.PAPER SIZE
or