Filter
Top Products
CHAPTER 3 PRINT
3-1
CHAPTER 3
PRINT
LAMPS AND SWITCH
This section refers to the following lamps and switch on the machine
control panel.
Drum
Alarm
Ready
Paper
Data
Toner
Fig. 3-1 Lamps and Switch on Control Panel
✒ Note
When the
power
switch is off or the machine is in sleep mode, all lamps
including the
Ready
lamp are off.
Ready (Paper) Lamp
The
Ready
lamp indicates the current status of the machine.
Lamp Machine status
Off
❍
The
power
switch is off or the machine is in sleep
mode. If the machine is in sleep mode, it will wake
up automatically when it receives data or you
press the control panel switch.
Blinking
❍↔●
The machine is warming up.
(Blinking at 1 second intervals)
Blinking
❍↔●
The machine is cooling down and stops printing
until the internal temperature lowers.
(Blinking at 2 seconds intervals)
On
●
The machine is ready to print.
This lamp also works as the
Paper
lamp with the
Alarm
lamp. They
blink simultaneously to indicate a paper error. See “Operator Calls”
Chapter 7.