Filter
Top Products
USER’S GUIDE
7-14
Copy
Question Recommendation
The machine does not copy. Check the following;
The machine is turned on.
All of the protective parts have been removed.
The top cover is closed.
The
Alarm
LED is blinking. If the LED is
blinking, refer to the Operator Calls section of this
manual.
The machine copies, but
nothing is printed on the copy.
check if;
Original documents are inserted face down in the
document feeder.
The toner cartridge is not empty.
Copy has a vertical line. Clean the scanning unit refering to ‘Cleaning the
Scanning Unit’ section in Chapter 6.
Some portion of the image is
missing on the copy.
The machine has unscannable and unprintable
areas. Check the areas in Chapter 2.
If the image is larger than the paper size, it may be
lost.
Memory full error.
A DOS application is using download fonts and
the memory is almost full.
After a memory full error occurs, the machine
clears any downloaded fonts automatically.
Scan
Question Recommendation
The machine does not scan Check the following;
The machine is turned on.
All of the protective parts have been removed.
The top cover is closed.
Computer indicates an error
message other than above.
Check the following;
The machine is connected directly to the
computer.
The computer can work in bi-directional mode.
The scanner port is correctly set on your
computer.
The Scanner driver is correctly selected in your
application.
A recommended interface cable is being
used.(IEEE 1284 compliant)
Scanned image has vertical
white or black line.
Clean the scanning unit.