Filter
Top Products
14
● BLK LEN. (block length): * For the PORT Label Type mode:
0.80" to 8.00" (20 to 200 mm)
Default: 1.20" (30 mm)
* For the PANEL Label Type mode:
0.25" to 8.00" (6 to 200 mm)
Default: 1.20" (30 mm)
● FRAME: * For the PORT Label Type mode:
OFF, 1 , 2 , 3 , 4
Default: OFF
* For the PANEL Label Type mode:
OFF, 1 , 2 , 3 ,
4 , 5 , 6 ,
7 , 8 , 9
Default: OFF
● PRINT (print order): FRONT, REVERSE
Default: FRONT
☞ For these types of labels, we recommend using Strong Adhesive Tape.
☞ The PRINT parameter is only available with the PANEL Label Type mode.
☞ Using the Numbering function with the PANEL Label Type mode makes it easy
to create a single label of multiple blocks containing ascending characters, which
can be used, for example, to label patch panels as shown above. Simply type in
one block of text, and then use the Numbering function to print several copies of
the text block on a single label while automatically increasing certain characters
in each block. (For details on the Numbering function, refer to
Printing multiple
copies with incremental characters
on page 32.)