Brother DCP-7010L All in One Printer User Manual


 
Chapter 6
6 - 24
2
Hold down the lock lever on the left and
pull the toner cartridge out of the drum
unit.
Note
Discard the used drum unit according to
local regulations, keeping it separate from
domestic waste. You can also check our
ecology website www.brothergreen.co.uk
for recycling information. Be sure to seal
the drum unit tightly so toner powder does
not spill out of the unit. If you have
questions, call your local waste disposal
office.
Wait to unpack the new drum unit until
immediately before installing it. Place the
old drum unit into the plastic bag.
3
Reinstall the toner cartridge into the new
drum unit. If you put it in properly, the
lock lever will lift automatically.
4
Install the drum unit and toner cartridge
assembly in the machine.
5
Press Options.
To confirm you are installing a new
drum, press .
6
When the LCD shows Accepted, close
the front cover.
Replace Drum?
Yes
No