Filter
Top Products
Control panel setup
45
4
For MFC-J430W/J432W 4
The factory settings are shown in bold.
1
On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.
2
For details, please refer to the Web Connect Guide located on the Manual download page for your model on the Brother Solutions Center
(http://solutions.brother.com/
).
Main menu Submenu Menu Selections Options
Network TCP/IP BOOT Method Auto/Static/RARP/BOOTP/DHCP
IP Address [000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
1
Subnet Mask [000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
1
Gateway [000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
Node Name BRWXXXXXXXXXXXX= (your machine’s Ethernet
address)
(up to 15 characters)
WINS Config Auto/Static
WINS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
DNS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
APIPA On/Off
Setup Wizard — (Choose SSID from list or manually add SSID)
WPS/AOSS —
WPS w/PIN Code —
WLAN Status Status (Examples)
Active(11b)/Active(11g)/Active(11n)/
AOSS Active/Connection Fail
Signal Signal:Strong/Signal:Medium/Signal:Weak/
Signal:None
SSID (Shows SSID with up to 32 digits)
Comm. Mode Ad-hoc/Infrastructure
MAC Address
WLAN Enable On/Off
Network Reset