Filter
Top Products
5 - 8
SETUP RECEIVE
Setting Up Sequential Polling Receive
Your machine can request documents from several fax units in a single
operation. Afterward, a Sequential Polling Report will be printed. (See
Canceling a Scheduled Job, Page 5-8.)
1
Press Menu, 2, 1, 7.
2
Press or to select Polling ON (or
OFF), and then press Set.
3
Specify the destination fax machines you
wish to poll using One Touch, Speed
Dial, a Group or the dial pad. You must
press Broadcast between each location.
4
Press Fax Start.
The LCD shows DIALING.
Your machine will poll each number or
group member in turn for a document.
Canceling a Scheduled Job
You can cancel tasks you’ve scheduled, such as Delayed Fax or Polling
Transmit.
1
Press Menu, 2, 6.
Any waiting jobs will appear on the
LCD. If no jobs are waiting, the LCD
shows NO JOB WAITING.
2
If you have more than two jobs waiting, use or to select the job you want
to cancel, and then press Set.
—OR—
If you have only one job waiting, go to Step 3.
3
Press 1 to cancel—OR—Press 2 to exit without canceling.
To cancel another job, return to Step 2.
4
Press Stop/Exit.
You can check which jobs are waiting in memory by following Steps 1 and 2
above.
7.POLLING RX
POLLING RX:OFF?
SELECT <- -> & SET
ENTER FAX NO.
PRESS FAX START
6.REMAINING JOBS