Filter
Top Products
V - 34
WSW21 (TAD setting 1)
Selector
No.
Function Setting and Specifications
1
|
5
Max. waiting time for voice signal
No. 1 2 3 4 5
0 0 0 0 0 : No detection
0 0 0 0 1 : 1 sec.
0 0 0 1 0 : 2 sec.
0 0 0 1 1 : 3 sec.
| |
0 1 0 0 0 : 8 sec.
| |
1 1 1 1 1 : 31 sec.
6
7
Two-way recording
No. 6 7
0 0 : For U.S.A. (A)
0 1 : Except for U.S.A. (B)
1 0 : Without beep (C)
1 1 : OFF (D)
8
Erasure of message stored in the
memory after the message transfer
0: Yes 1: No
NOTE: Selectors 1 through 8 are applicable to those models equipped with a built-in TAD.
ll Selectors 1 through 5: Max. waiting time for voice signal
In the TAD mode, the equipment waits for voice signal for the time length specified by these
selectors before it automatically shifts to the facsimile message receive mode or disconnects the
line.
ll Selectors 6 and 7: Two-way recording
These selectors select the specifications of the two-way recording feature.
ll Selector 8: Erasure of message
Setting this selector to "0" will erase the message recorded in the memory after the document
retrieval feature transfers the message.