Filter
Top Products
V - 37
WSW24 (TAD setting 2)
Selector
No.
Function Setting and Specifications
1
2
Maximum OGM recording time
No. 1 2
0 0 : 15 sec.
0 1 : 20 sec.
1 0 : 30 sec.
1 1 : 50 sec.
3
4
Time length from CML ON to
start of pseudo ring backtone
transmission
No. 3 4
0 0 : 4 sec.
0 1 : 3 sec.
1 0 : 2 sec.
1 1 : 1 sec.
5
|
8
Attenuator for playback of ICM/
OGM to the line
(Selectable from the range of 0-
15 dB)
0: 0 dB 1: 8 dB
0: 0 dB 1: 4 dB
0: 0 dB 1: 2 dB
0: 0 dB 1: 1 dB
NOTE: Selectors 1 and 2 are applicable to those models equipped with a built-in TAD.
l Selectors 1 and 2: Maximum OGM recording time
These selectors set the allowable maximum recording time for an OGM.
l Selectors 3 and 4: Time length from CML ON to start of pseudo ring backtone transmission
These selectors set the length of time from CML-ON up to the start of pseudo ring backtone
transmission.
In those versions which have an OGM facility, the settings made by these selectors also apply to
the length of time from CML-ON up to the start of OGM transmission.
l Selectors 5 through 8: Attenuator for playback of ICM/OGM to the line
Setting two or more selectors to "1" produces addition of attenuation assigned to each selector.
This setting will not be limited by selector 8 of WSW23.