Filter
Top Products
59
MESSAGE CENTER
Step 2: Recording Message Center Outgoing Message
Recording the Message Center Outgoing Message (MSG CTR OGM) is the
second step you need to follow before you can turn on the Message Center.
Make sure your OGM is less than 20 seconds long.
1
Press
Function
,
8
,
3
.
MSG CTR OGM?
SELECT & SET
2
Press or to select MSG CTR OGM? and press
Set
.
MSG CTR OGM?
This is the only setting you can select if you want to turn on the Message
Center.
3
Press
Record
, then pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time.
Please leave a message after the signal. If you wish to send a fax,
please press 5 1, wait for fax tones, then press the
Start
button.
4
Replace the handset. The Message Center plays your OGM.
5
Press
Stop
to exit.
Listening to Outgoing Message (OGM)
1
Press
Function
,
8
,
3
.
2
Press or to select MSG CTR OGM (not F/T OGM) and
press
Set
.
3
Press
Play
to hear the OGM. Adjust volume by pressing Speaker Volume
or .
4
Press
Stop
to exit.
Erasing Outgoing Message (OGM)
1
Press
Function
,
8
,
3
.
2
Press or to select MSG CTR OGM (not F/T OGM) and
press
Set
.
3
Press
Erase
.
4
Press
1
to erase the OGM—OR—Press
2
to exit without erasing.
5
Press
Stop
to exit.