Filter
Top Products
Control Panel
81
4
Print Position X Offset -500/-499.../0*.../499/
500Dots
Moves the print start position (at the
top-left corner of pages) horizontally
up to -500 (left) to +500 (right) dots in
300 dpi.
Y Offset -50/-49.../0*.../499/
500Dots
Moves the print start position (at the
top-left corner of pages) vertically up
to -50 (up) to +500 (down) dots in
300 dpi.
Auto FF Off*/On Allows you to print the remaining
data without pressing Go.
HP LaserJet Font No. I000.../I059*.../I071
Font Pitch 0.44/10*.../99.99
Font Point 4.00/12*.../999.75
Symbol Set PC-8*... Sets the symbol set or the character
set.
Table Print Prints code table.
Auto LF Off*/On ON: CR i CR+LF,OFF: CR i CR
Auto CR Off*/On ON: LFiLF+CR, FFiFF+CR, or
VT i VT+CR OFF: LF i LF, FF i
FF, or VT i VT
Auto WRAP Off*/On Chooses whether a line feed and
carriage return will happen when the
printer reaches the right margin.
Auto SKIP On*/Off Chooses whether a line feed and
carriage return will happen when the
printer position reaches the bottom
margin.
Left Margin #### Sets the left margin at column 0 to 70
columns at 10 cpi.
Right Margin #### Sets the right margin at column 10 to
80 columns at 10 cpi.
Top Margin #### Sets the top margin at a distance
from the top edge of the paper: 0,
0.33, 0.5, 1.0, 1.5 or 2.0. The default
setting is 0.5.
Bottom Margin #### Sets the bottom margin at a distance
from the bottom edge of the paper -
0, 0.33, 0.5, 1.0, 1.5 or 2.0. The
default setting is 0.5.
Lines #### Sets the number of lines on each
page from 5 to 128 lines.
Print Menu (continued)
Submenu Menu Selections Options Descriptions
The default settings are shown in Bold with an asterisk.