Filter
Top Products
92
Printing Received Faxes
Difficulty Suggestions
Condensed print and white streaks
across the page or the top and
bottom of sentences are cut off.
You probably had a bad connection, with static or interference on the telephone
line. Ask the other party to send the fax again.
Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
Received colour fax prints only in
black and white.
Replace the colour ink cartridges that are empty or nearly empty, and then ask the
other person to send the colour fax again. (See Replacing the ink
cartridges on page 103.)
Left and Right margins are cut off or
a single page is printed on two
pages.
Turn on Auto Reduction. (See Printing a reduced incoming fax on page 33.)
Telephone Line or Connections
Difficulty Suggestions
Dialling does not work.
(No dial tone)
Check that the machine is plugged in and switched on.
Check the line cord connection.
(Not available in New Zealand)
Change the Tone/Pulse setting. (See Quick Setup Guide.)
Lift the external telephone’s handset, (or the machine’s handset or cordless
handset if available), and then dial the number to send a manual fax. Wait to hear
fax receiving tones before pressing Mono Start or Colour Start.
The machine does not answer
when called.
Make sure the machine is in the correct receiving mode for your setup. (See
Receive modes on page 30.) Check for a dial tone. If possible, call your machine
to hear it answer. If there is still no answer, check the telephone line cord
connection. If there is no ringing when you call your machine, ask your telephone
company to check the line.
Receiving Faxes
Difficulty Suggestions
Cannot receive a fax Make sure the machine is in the correct receiving mode for your setup. (See
Receive modes on page 30.)
If you often have interference on the telephone line, try changing the menu setting
of Compatibility to Basic. (See Telephone line interference on page 103.)
Sending Faxes
Difficulty Suggestions
Cannot send a fax
Make sure that the Fax key is illuminated. (See Entering Fax
mode on page 24.)
Ask the other party to check that the receiving machine has paper.
Print the Transmission Verification Report and check for an error. (See
Reports on page 52.)