Filter
Top Products
GETTING STARTED 4 - 13
Setting the Tray Use for Fax mode
If your MFC does not have the optional tray #2, you can skip this
setting. The default setting of
Auto
allows your MFC to choose the
paper from the optional Tray #2 if Tray #1 is out of paper or if
incoming faxes will fit best on the paper in Tray #2.
1
Press
Menu
,
1
,
9
.
2
Press or to select
Tray#1
Only
,
Tray#2 Only
or
Auto
.
3
Press
Set
.
4
Press
Stop/Exit
.
If Auto Reduction is turned on, incoming faxes will be printed
from the tray that is set for Auto Reduction. (See Printing a
reduced incoming fax (Auto Reduction)
on page 5-5.)
General Setup
9.Tray Use:Fax