Filter
Top Products
Setting Up the Machine
4
STEP 1
1
1 Install the drum and toner cartridge unit assembly
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
1 Open the front cover by pressing the front
cover release button (1).
2 Unpack the drum and toner cartridge unit
assembly.
3 Gently rock it from side to side several times to
distribute the toner evenly inside the assembly.
4 Put the drum unit assembly into the machine
until it clicks into place.
5 Close the front cover of the machine.
(1)