Filter
Top Products
- 17 -
Drum Lamp
The
Drum
lamp indicates the drum unit is nearly at the end of its life.
Lamp Machine status
Off
❍
The drum unit can be used.
On
●
The drum unit is nearly at the end of its life. Installing a new drum unit
turns off this lamp. See “REPLACING THE DRUM UNIT” in Chapter
6 of the On-line manual.
Alarm Lamp
The
Alarm
lamp blinks to indicate a machine error status such as “Cover Open” and
“Memory Full.” If any other error occurs, the machine indicates the error by blinking
the
Alarm
lamp with another lamp or by printing an error report.
✒
Note
The
Ready
,
Data
and
Drum
lamps are used to indicate machine errors with the
Alarm
lamp. See “ALARM INDICATIONS AT A GLANCE” in this manual and take
corrective action for the error.
Switch
This switch will be used for the following purposes depending on the situation.
Cancel printing
If you press the
switch
during printing, the machine immediately stops printing and
ejects the paper.
Wake-up
If the machine is in sleep mode, pressing the
switch
wakes it up into the ready state.
Form Feed
If the
Data
lamp is on, press the
switch
. The machine prints any data remaining in the
machine memory: this operation is called “Form Feed.”
Error Recovery
If an error occurs, the machine will recover from some errors automatically. If the error
does not clear automatically, press the
switch
to clear the error and continue machine
operation.