Filter
Top Products
- 32 -
For errors shown below, the machine indicates an operator call by blinking the
Alarm
lamp.
If you use the machine with the supplied Windows driver, the status monitor will appear to
indicate the error on your computer screen. The machine also prints some error messages on
paper.
Error Action
Cover Open
Close the top cover of the machine.
Print Overrun
Press the panel
switch
to print the data remaining in the
machine.
If you use the supplied Windows driver, try again after
turning on Error Recovery in the PRINT menu of your
application software, (Refer to Help section in the Windows
printer driver for the details.)
If this does not clear the error, reduce the complexity of your
document or reduce the print resolution.
Memory Full
This error can occur only
when using DOS or
Macintosh.
Press the panel
switch
to print the data remaining in the
machine.
Reduce the print resolution or reduce the complexity of your
document.
Parallel Interface Line
Error
Press the panel
switch
to resume printing.
Check that the connection between your computer and machine
is secure and correct, and check the interface cable.