Brother MFC/HL-P2000 Printer User Manual


 
- 36 -
MACHINE SPECIFICATIONS
Printing
Print Method Electrophotography by semiconductor laser beam scanning
Laser Wavelength: 780 nm / Output: 5 mW max.
Resolution
600 dots/inch (under Brother Printing Solution for Windows
/
under Brother Software PCL5e for DOS box in
Windows )
300 dots/inch (under DOS operating system)
Print Quality Normal printing mode
Economy printing mode (up to 25% and 50% toner saving)
Print Speed Up to 10 pages/minute
(when loading A4 or letter-size paper from the multi-purpose sheet
feeder)
NOTE
: Maximum print speed is obtained by printing several copies of
the same page. Print speed may vary depending on interface type,
emulation, processing power of the computer, memory allocated to the
print job, paper size and graphic quality.
Warm-Up
Max. 30 seconds at 23°C (73.4°F) (The warm up time depends on the
ambient temperature and humidity.)
First Print 15 seconds (when loading A4 or letter-size paper from the multi-purpose
sheet feeder)
Print Media Toner cartridge:
Life Expectancy:2,400 pages/new toner cartridge
1,000 pages/starter toner cartridge
(when printing A4- or letter-size paper at 5% print coverage)
NOTE
: Toner life expectancy will vary depending on the type of
average print job printed.
Drum Unit:
Life Expectancy:20,000 pages at 20 pages per job
8,000 pages at 1 page per job
NOTE
: There are many factors that determine the actual drum
life, such as temperature, humidity, type of paper and toner that
you use, the number of pages per print job, etc..