Filter
Top Products
- 34 -
If you see any of these service call indications, turn off the power switch, wait a few seconds
and then turn it on again and try to print again.
If you cannot clear the error and see the same service call indication after turning on the
machine, consult your dealer or our authorized service representative. Report the error status
and situation referring to the above table.
✒
Note
Be sure that the top cover and the main controller board are firmly installed.
✒
Note
If you have any problems other than described in this section, see “CHAPTER 7
TROUBLESHOOTING, Q & A” of the On-line Users Guide. If you are still unable to clear
the problem after reviewing the information in the Users Guide, consult your dealer.
Service Calls for Copying and Scanning Functions
If an unrecoverable error occurs, the machine shows “E” and “0”, “1” or “2” on the display
alternately. When this happens, turn off the power switch, wait a few seconds and then turn it
on again and try again.
If you cannot clear the error and see the same service call indication after turning on the
machine, consult your dealer or our authorized service representative.