Filter
Top Products
29
7
7
Copy options 7
You can change the copy settings for the next
copy.
These settings are temporary. The machine
returns to its default settings one minute after
copying.
Press COPY
1
and then press a or b to scroll
through the copy settings. When the setting
you want is highlighted, press OK.
When you have finished choosing settings,
press Black Start or Color Start.
1
MFC models only
NOTE
You can save some of the settings you
use most often by setting them as the
default settings. These settings will stay
until you change them again. (See Setting
your changes as the new default
on page 36.)
Stop copying 7
To stop copying, press Stop/Exit.
Improving copy quality 7
You can choose the copy quality. The factory
setting is Normal.
NOTE
If you choose Fast
1
or Normal, you can
only choose Plain Paper in
Paper Type.
1
MFC models only
Fast (MFC models)
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
Normal
Normal is the recommended mode for
ordinary printouts. This produces good
copy quality with good copy speed.
Best
Use Best mode to copy precise images,
such as photographs. This provides the
highest resolution and slowest speed.
a Load your document.
b (MFC models)
Press (COPY).
c Enter the number of copies you want.
d Press a or b to choose Quality.
Press OK.
e Press a or b to choose Fast
1
, Normal
or Best .
Press OK.
1
MFC models only
f If you do not want to change additional
settings, press Black Start or
Color Start.
Making copies 7