Brother MFC-J450DW All in One Printer User Manual


 
General setup
3
1
Automatic Daylight
Saving Time
(MFC models)
1
You can set the machine to change
automatically for daylight saving time. It will
reset itself forward one hour in the Spring and
backward one hour in the Fall. Make sure you
have set the correct date and time in the
Date & Time setting.
The factory setting is Off, so you will have to
turn on Automatic Daylight Saving Time as
follows.
a Press Menu.
b Press a or b to choose
Initial Setup.
Press OK.
c Press a or b to choose Date & Time.
Press OK.
d Press a or b to choose
Auto Daylight.
Press OK.
e Press a or b to choose On (or Off).
Press OK.
f Press Stop/Exit.
Sleep Mode 1
You can choose how long the machine must
be idle (up to 60 minutes) before it goes into
Sleep Mode. The timer will restart if any
operation is carried out on the machine.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Sleep Mode.
Press OK.
d Press a or b to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins to choose which is the length of
time the machine is idle before entering
Sleep Mode.
Press OK.
e Press Stop/Exit.