Filter
Top Products
2006/05/31
CHAPTER 2 "PCL" - 104
For instance, a font extended response with the location type set to 1( selected at present ) where the font which
is selected at present is the internal Pc Tennessee (18 point identified for printing) bold, returns the response as
follows.
PCL
INFO FONTS EXTENDED
SELECT="<Esc>(8U<Esc>(s0p18.00h0s3b4101T"
DEFID="<Esc>(8U<Esc>s0p18.000s3b4101T"
DEFID="I 2"
NAME="PcTennessee Bd"
LOCTYPE=1
LOCUNIT=1
8.5.12. Macro response
The status response for macros indicates all of the macro IDs ("IDLIST=") for the macros in a particular
location.
Status location type 1( selected at present ) is an unused location for macros and an error is returned.
A macro status response may be shown as follows.
PCL
INFO MACROS
IDLIST="1, 3, 8, 29, 32"
8.5.13. Use-defined pattern response
The status response of user-defined patterns indicates all of the user-defined patterns and all of the user-defined
pattern IDs ("IDLIST") for the patterns in a particular location.
A user-defined pattern response may be shown as follows.
PCL
INFO PATTERN
IDLIST="1, 2, 9, 13, 27, 456"
When the location type is specified to 1 (selected at present), "LOCTYPE=" and "LOCUNIT=" lines are added.
It returns the "LOCTYPE=" only for a status location type 1 requirement. It specifies the location type of the
pattern which is selected at present.
It returns the "LOCUNIT=" only for a status location type 1 requirement. It specifies the location unit of the
pattern which is selected at present.
A user-defined pattern response for the pattern selected at present may be shown as follows.
PCL
INFO PATTERN
IDLIST="88"
LOCTYPE=4
LOCUNIT=2
When the pattern selected at present is set to one of the internal HP-specified patterns, there is no number
available and it returns the response "ERROR=NONE".
PCL
INFO PATTERNS
ERROR=NONE
8.5.14. Symbol set response
The symbol set response indicates all of the symbol set IDs ("IDLIST") for all of the symbol sets in the
identified location. There can be bound and unbound scalable fonts in the identified location (type and unit).
A symbol set response may be shown as follows.
PCL
INFO SYMBOLSETS
IDLIST="0U, 2K, 8M, 11U"