Filter
Top Products
2006/05/31
CHAPTER 5 PJL - 33
Variables Description Sample Value Range
THICKPRDLY OFF, SHORT, NORMAL, LONG
(HL-2460/7050)
BONDPRDLY OFF, SHORT, NORMAL, LONG
(HL-2460/7050)
FLICKER MODE 0 to 63 (HL-2460/7050)
APPLEUSBPS Sets Postscript Pure Binary Printing
from Macintosh via USB.
ON, OFF (HL-1850/1870N/5040/
5050/5070N/5140/5150D/
5170DN/5240/5250DN/5270DN/
5280DW)
DX1JOB1PAGE Sets 1JOB1PAGE Printing mode.
As for HL-6050 series, supported ROM
version is 1.18 or later.
SIMPLEX, DUPLEX (HL-1850/
1870N/5040/5050/5070N/5140/
5150D/5170DN/6050/6050D/
6050DN/8050N/5250DN/5270D
N/5280DW)
AUTOONLINE Sets auto return function from setting
Panel mode to Ready mode.
ON, OFF (HL-7050/6050/6050D/
6050DN/5270DN/5280DW)
BUTTONREPEAT Sets key repeating speed in Panel mode. BUTTON100MSEC,
BUTTON200MSEC,
BUTTON300MSEC,
BUTTON400MSEC,
BUTTON500MSEC,
BUTTON1000MSEC,
BUTTON1500MSEC,
BUTTON2000MSEC (HL-7050/
6050/6050D/6050DN/5270DN/52
80DW)
MESSAGESCROLL Sets scrolling time at Scroll message. 1-10 (HL-7050/6050/6050D/
6050DN/5270DN/5280DW)
ERRORBUZZER Sets Buzzer mode at Error condition. OFF, ON (HL-7050/6050/6050D/
6050DN)
PANELBUZZER Sets Buzzer mode for Panel Operation. OFF, ON (HL-7050/6050/6050D/
6050DN)
BUZZERVOLUME Sets Buzzer volume. LOW, HIGH (HL-7050/6050/
6050D/6050DN)
CARBONMODE Sets Carbon mode OFF, ON, AUTO, PARALLEL
(HL-
6050/6050D/6050DN/5270DN/52
80DW)
CARBONCOPIES Set the number of Carbon copies. 1-8 (HL-
6050/6050D/6050DN/5270DN/52
80DW)
CARBON1TRAY Select input tray for the first page. REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W)
CARBON2TRAY Select input tray for the second page. REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W)
CARBON3TRAY Select input tray for the third page. REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W)
CARBON4TRAY Select input tray for the fourth page. REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W)