Filter
Top Products
Page 6
Driver Installation
NOTE: Please do NOT connect your PocketJet printer to your computer via the USB
cable UNTIL you have performed the driver installation. If you accidentally
do so, cancel the “New Hardware Wizard”, disconnect the printer, and begin
the driver installation described below.
Using a Bluetooth Interface - Be sure to install a Bluetooth driver on the host
computer before installing the PocketJet driver and PocketJet Utility if you
are going to use the Bluetooth interface.
CD Install
1. Insert the CD in your PC’s CD drive.
2. Select the model.
3. Select the install item you wish to install.
4. Follow all on-screen instructions to install the software. Your Windows operating
system will be selected by automatically. They will run one-by-one until all have
been installed.
5. Click “Finish” to close the CD or browse the CD to learn about additional
solutions available for your PocketJet printer.
NOTE: If the automatic CD installation does not proceed as explained above, use the
manual install procedure below.